CJV200-130 - Mimaki CJV200-130

Artikel-Nr.:
CJV200-130

Mimaki CJV200-130

Technische Daten

Druckkopf: 1 Piezo-Druckkopf
Druckauflösung: 600, 900, 1200 dpi
Max. Druckbreite: 1.360mm
Max. Medienbreite: 1.370mm
Tinte Typ/Farben: SS22, SS21
440ml Kartuschen oder 1L SS22 oder 2L SS21 Beutel (Voraussetzung MBIS)
Max. Rollengewicht: 25kg
Schnittstelle: USB 2.0, LAN
Maße (L × B × H): 2520 × 748 × 1.370mm
Gewicht: 130kg
RIP-Software: Rasterlink 7

Gewährleistung: 1 Jahr auf Basis Bring-In, Druckkopf 1 Jahr Gewährleistung bei Verwendung von Mimaki Originaltinten. Bitte beachten Sie die vom Hersteller beschriebenen Pflegemaßnahmen.
Nichtbeachtung kann zum Verlust der Gewährleistung führen.

Ihr Preis: 13.040,00 €

je Stück zzgl. MwSt.

Lieferzeit ca. 1 - 2 Werktage

Beschreibung Downloads

Specifications

		CJV200-75	CJV200-130	CJV200-160
Print head		On-demand piezo head
Print resolution		600dpi, 900dpi, 1200dpi
Print gap		By manual 2 levels (1.5/2.0 mm)
Ink	Type/Color	Eco-solvent ink SS22 (C,M,Y,K,Lc,Lm,Lk,Or) SS21 (C,M,Y,K,Lc,Lm,Lk,Or) 1 BS4 (C,M,Y,K) Only available in specific countries
Ink	Capacity *2	SS22：440ml Ink cartridge / 1L Ink pack SS21: 440ml Ink cartridge / 2L Ink pack BS4: 600ml Ink pack *3 / 2L Ink pack
Maximum print width		800mm (31.5")	1,360mm (53.5")	1,610mm (63.4")
Media	Maximum width	810mm (31.9")	1,370mm (53.9")	1,620mm (63.8")
	Thickness	1.0 mm or lower
	Roll diameter	φ180 mm or less
	Roll weight	25 kg (55.1 lb) or less
	Roll inside diameter	2 inch / 3 inch
Cutting function	Cutting speed	Max. 300 mm/s
	Acceleration	Max. 0.5G
	Cutting pressure	10 - 450 gf
	Cutter response times	10 times/sec
	Repeatability	±0.2 mm (Excluding shrinkage / expansion caused by the film temperature)
Interface		Ethernet 1000 BASE-T (Recommended) / USB2.0 Hi-speed
Certifications		VCCI class A, FCC class A, ETL IEC 62368-1, CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, Energy Star, RCM, KC
Power supply		Single-phase (AC 100–120V/200–240V)×2　50/60Hz±1Hz
Power consumption		Max. 1,320 W x 2 or less / Min. 4.5 W or less (Sleep mode)
Operational environment		Temperature: 20–30 °C (68–86 °F) Humidity: 35–65% Rh (Non condensing) Recommended temperature: 20–25 °C (68–77 °F) Dust level: General office level
Dimensions (W×D×H)		1,960mm × 748mm × 1,370mm (77.2"×29.4"×53.9")	2,520mm × 748mm × 1,370mm (99.2"×29.4"×53.9")	2,770mm × 748mm × 1,370mm (109.0"×29.4"×53.9")
Weight		105 kg (231.5 lb)	130 kg (286.6 lb)	140 kg (308.6 lb)

*1 Scheduled to be available in March 2025.
*2 The use of 1L/2L ink packs requires OPT-J0364 MBIS3 (Mimaki Bulk Ink System 3) and OPT-J0576 MBIS BKT OPT (attachment), which are options sold separately.
*3 600 ml ink pack requires eco cartridge (OPT-J0361: ECO CASE 4). Eco cartridges can be used repeatedly by replacing ink packs.

Some of the samples in this website are artificial renderings.
Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

Overwhelming Beauty

The CJV200 is equipped with a single print head of "330 Engine" in Mimaki's flagship printer. The technology of precise control of a minimum 3pl ink drop and the print head that delivers high-density prints, even at high speeds, resulting in overwhelmingly beautiful printing.

Reliable Productivity even during Peak Season

Easy for Everyone

Simple Design

Single Print Head for Simple Maintenance

Single print head system contributes less cleaning time and adjustment time. The simple design allows you to work quickly and easily.

Wide Open Cover for Easy Access

Up-Facing Control Panel for Easy Operation

Easy and Precise Automatic Set Up

Automatically performs necessary adjustment at the media setup to ensure optimal image quality at all times.
(DAS | Dot Adjustment System)

Ink Saving Function: Reduce Ink Consumption with Just 2 Clicks

Anyone can easily reduce ink consumption without technical expertise.
This function is available with any substrates and profiles.

Simple Design Software "Simple Create"

SimpleCreate is software that allows you to create labels, POP, stickers, and other designs without a need of DTP software.

It provides simple tools for creating designs and cutlines, as well as direct output from the software.

New GBL-free eco-solvent ink "SS22"

Inks for general eco-solvent printers contain an ingredient (GBL) whose use has been increasingly regulated worldwide in recent years. SS22, first installed in the CJV200 Series, is a new eco-solvent ink that does not contain GBL and is safer for operators than ever before.

The SS22 ink inherits the weather resistance, dryness, and other features of SS21 ink, which has long been popular in the market, and is the best-class in the industry, and can be switched to CJV200 from conventional machines with confidence. It is also sold in a paper cartridge format that significantly reduces the amount of plastic used, making it an environmentally friendly solution.

Model

CJV200-75	Maximum print/cut width: 800 mm (31.5")
CJV200-130	Maximum print/cut width: 1,360 mm (53.5")
CJV200-160	Maximum print/cut width: 1,610 mm (63.4")